Tru64
-----
lmf - license manager
sysman - configuration
setld - package manager
showfdmn - shows volumes in filesets
showfsets - show filesets
hwmgr - view/manip hardware
  hwmgr -view dev - view devices
sizer -v - shows OS version
cluamgr - manager cluster apps
rcmgr - manages /etc/rc.config
monitor - monitors lots of stuff

init scripts in /sbin/init.d

/sbin/advfs/verify
            advscan

inetd -h = restarts inetd
  /usr/local/etc/hosts.allow
                 tcpd
/etc/fdmns - fileset config
/etc/sysconfigtab = /etc/system on solaris
/etc/clua_services
cluamngr
caa_stat -t
/var/cluster/caa
		/script - start/stop scripts
		/profile .cap
caa_register
all_nodes
clu_get_info

Logs go to /var/adm/syslog.dated/current/

cdsl - context determined sysmlink
/cluster/members/{memb}/...
   cluster0 = unknown node
   cluster# = cluster id #

uses seperate pid space for each node - init is not 1
cron is seperate

usermod -x administrative_loca_applied=0 username
edauth -r username ; convuser -a username - removes then reapplied c2 security stuff
edauth -g username - lists auth

Prom:
show dev - shows devices
wwid - SAN manager
wwid -clear all = clears devices
wwid -qui -udid # = adds id# to box
set bus_probe_algorithm new
set bootdef_dev <device>

Moving data:
addvol to fileset
rmvol old volume - moves data to new volume
balance to re-layout

Quotes on filesets:
datax_domain#... is quotaed
filesize available is set to quota
data1_domain#data1 is the whole disk
 - only available and used mean anything
if partition is full, increase quota
Set hard limit to 50G on CQU fileset on data1_domain:
  # chfsets -b 50000000 data1_domain CQU

Firmware upgrade (ES40)
reboot to cd
follow instructions

Installing cluster
clu_create
clu_add_member

partition c is whole of disk

Tru64 install
Use kernel options: 1-4 9-10 12-13

cd is /dev/dsk/cdrom0c

Veritas
-------
vol <- plex <- subdisks

vxprint
vxassist
vxdg
vxdisk
vea - gui admin for volume manager
vcs - gui admin for cluster

/etc/VRTsvcs/conf/config - config files
	.stale = lockfile

/dev/vx/r?dsk/diskgroup/volume - device

cluster service app = cluster admin services

Heartbeat
heartbeat = packet with `cafe'
identifier = uniq id between 1 and 255
LLT - llstat
GAB - gabconfig

Peoplesoft
----------
Install of pstrain
Peopletools on windows
Tuxedo on unix
SQR on unix
Server transfer - pstrans on win
Setup profile (pstrain saplay)
  Run psmv.sh
Appserver setup  /usr/local/psoft/appserv
  psadmin
Cobol
  Use 32 bit mode
Oracle db

Hardware
--------

HSV = EVA
HSG = EMA
HSZ = ESA

Solaris
-------
/opt/SUNWexplo

/usr/platform/sun4u/sbin/prtdiag -v

showrev

prtconf -v

/etc/system for setting 100M full duplex
set hme:hme_adv_100hdx=0
set hme:hme_adv_10fdx=0
set hme:hme_adv_10hdx=0
set hme:hme_adv_100fdx=1
set hme:hme_adv_autoneg_cap=0

ndd -set /dev/hme adv_100fdx 1
ndd -set /dev/hme adv_autoneg_cap 0

Finding size of a process
ps -el then look for SZ
that gives the number of pages used
then /usr/bin/pagesize gives you the pagesize
probably 8192

sys-unconfig - removes all host and network config
logging: edit /etc/vfstab and replace - at end of all UFS fs with logging

Restores
--------
Cd to dir on host you want to restore file
$ recover -s gaffa
> changetime "29 July 2003"
> add directory / file
> volumes
> recover
May need to change tapes

Put tape in mail slot
nsrjb -d -s #    - moves from mail slot to slot #
snrjb -I -S #    - inventory from slot #
nsrjb -u	 - unmount
nsrjb -w -S #    - eject from slot # to mail slot 

nsrwatch  - watch whats going on